The harmony of the internal interior is formed by many components and interior transitions largely determine the style of the apartment. The construction boom gave rise to many enterprises that produce door sets of both standard sizes and original designs made taking into account the wishes of the customer. The standard interior door is always preferable than the door made in individual sizes. The cost of door structures produced by mass batches, as a rule, is a third cheaper than the implementation of individual orders. The standards of interior doors were formed in the USSR during the mass housing construction and still remain unchanged both in Russia and the rest of the post -Soviet space. Height 1900-2300 mm, width 550-850 mm or 600+600 mm in swing doors. European standards are somewhat different from the approved Soviet standards. When choosing a door crossing design, attention should be paid to the material from which the door is assembled and the weight of the finished product. When installing a heavy door, you will have to additionally strengthen the block, strengthen the loops, equip the videos, which will entail an increase in the cost of arranging transitions from the room to the room. Light wings are more convenient to use and do not require enhancing the door block. The light door structures (4-5 kg) are made of plastic or laminated wood-fiber plates. Heavier glass doors weigh about 20 kg, and wooden doors - from 25 to 40 kg. The door made of hardwoods will be even heavier. The standards of the interior doors unify the main design parameters and facilitate both the assembly of such passages and their installation. The installation of the interior door should exceed the sizes of the door leaflet in height and width to the doubled size of the box thickness which ranges from 15-45 mm. The thickness of the door frame is chosen depending on the weight of the canvas. The standard thickness of the interior door varies from the thinnest (15 mm) to massive thick (45 mm) and depends on the choice of the material from which the doors are made. The standard of the thickness of the interior doors for different manufacturers is different and is not constant. At the request of the customer, the doors can be made both massive or lightweight, but often the thickness of the door is determined, the thickness of the walls and the partitions between the rooms. The installation of very thick doors in a thin wall is simply impossible, as it will look ugly, and thin doors in massive walls are simply inappropriate. The standard dimensions of the interior door are compiled from the amount of the door leaf and the thickness of the door box elements. If the door box parameters do not correspond to the thickness of the wall, then they are equalized by cutting the box around the perimeter or installing its expanders in the form of a good or slope. Standard double -leaf interior doors are mounted either from two identical sash, or from one narrow and one wide. Such designs can be swinging or sliding if there is a need to save space. Spor bahislerinizi Türkiye'nin en güvenilir bahisçisiyle yapın. MOSTBETE'DE her zaman geniş bir oyun hattı
mosbet Türkiye'deki en popüler bahisçi. Yeni oyunculara 2500 TL bonus + 50 free spins
